© 2018 ProgM

Nachricht IFTMBP: D

NameIFTMBP
VersionD
Release18A
BeschreibungProvisional booking message

Elemente

SegmentEbeneBeschreibungOpt/Mand.
UNH0A service segment starting and uniquely identifying a message. The message type code for the Provisional booking message is IFTMBP. Note: Provisional booking messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMBP D A UNMandatory
BGM0A segment to indicate the beginning of a message and to transmit identifying number and type of the message.Mandatory
CTA0A segment to identify a person or department to whom communication should be directed.Optional
COM0A segment to identify a communication number of a person or department to whom communication should be directed.Optional
DTM0A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue.Optional
TSR0A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.Optional
FTX0A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.Optional
CNT0A segment to specify totals for a consignment.Optional
GDS0A segment to describe the nature of cargo.Optional
SG10SG1Optional
LOC1A segment to identify a location applying to the entire message.Mandatory
DTM1A segment to indicate date(s) and time(s) relating to the location.Optional
SG20SG2Optional
RFF1A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message function code in segment BGM), booking reference, order number, insurance contract, etc.Mandatory
DTM1A segment to indicate date and time relating to the reference.Optional
SG30SG3Optional
GOR1A segment to indicate applicable governmental procedures related to import, export and transport of the goods.Mandatory
FTX1A segment to provide additional governmental requirements information.Optional
SG41SG4Optional
DOC2A segment to indicate a document required by government.Mandatory
DTM2A segment to specify the date/time related to the required document.Optional
SG50SG5Optional
TDT1A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.Mandatory
DTM1A segment to indicate date(s) and time(s) related to the transport stage.Optional
SG61SG6Optional
TSR2A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.Mandatory
SCC2A segment to specify scheduling conditions associated to service requirements.Optional
SG71SG7Optional
LOC2A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.Mandatory
DTM2A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.Optional
SG81SG8Optional
RFF2A segment to specify the additional reference.Mandatory
DTM2A segment to identify date and time relating to the reference.Optional
SG90SG9Optional
NAD1A segment to identify the party's name, address, and function.Mandatory
LOC1A segment to indicate location where a specific function will be performed.Optional
SG101SG10Optional
CTA2A segment to identify a person or department within a party.Mandatory
COM2A segment to identify a communication number of a person or department to whom communication should be directed.Optional
SG111SG11Optional
DOC2A segment to identify a document required of, by or for the party.Mandatory
DTM2A segment to identify date and time relating to the reference.Optional
SG121SG12Optional
RFF2A segment to identify a reference used by a party.Mandatory
DTM2A segment to indicate date and time relating to the reference.Optional
SG131SG13Optional
CPI2A segment to identify default charge methodology.Mandatory
RFF2A segment to indicate a reference relating to the CPI segment, such as charge reference number.Optional
CUX2A segment to indicate payment currency related to the charge methodology.Optional
LOC2A segment to identify the place of charge collection.Optional
MOA2A segment to identify the monetary amount associated with the charges.Optional
SG141SG14Optional
TSR2A segment to specify a required service for the transport, such as re-icing.Mandatory
RFF2A segment to identify a commercial agreement related to the service requirement.Optional
LOC2A segment to indicate the location where the required service must be performed, such as place of re-icing.Optional
TPL2A segment to identify the means of transport to which the service requirement applies.Optional
FTX2A segment to provide any additional information related to the service requirement.Optional
SG150SG15Optional
GID1A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.Mandatory
HAN1A segment to specify handling instructions relating to the goods item.Optional
TMP1A segment to specify a temperature setting for a goods item.Optional
RNG1A segment to specify a temperature range setting for a goods item.Optional
TMD1A segment to specify transport movement details for a goods item.Optional
LOC1A segment to specify a country associated with a goods item, such as country of origin, or country of destination.Optional
FTX1A segment to specify processable supplementary information relating to the goods item.Optional
SG161SG16Optional
NAD2A segment to specify an address of a place of collection or delivery for a goods item.Mandatory
DTM2A segment to indicate date and time relating to the place of collection or delivery.Optional
GDS1A segment to describe the nature of cargo.Optional
SG171SG17Optional
MEA2A segment to specify measurements, other than dimensions, applicable to a goods item.Mandatory
EQN2A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG181SG18Optional
DIM2To specify dimensions applicable to a goods item.Mandatory
EQN2A segment to specify the number of equipment units to each of which the given dimension applies.Optional
SG191SG19Optional
RFF2A segment to identify a reference to a goods item.Mandatory
DTM2A segment to indicate date and time relating to the reference.Optional
SG201SG20Optional
DOC2A segment to specify a document prepared for a goods item.Mandatory
DTM2A segment to associate date and time with the prepared document.Optional
SG211SG21Optional
TPL2A segment to identify transport details for a goods item.Mandatory
SG222SG22Mandatory
MEA3A segment to specify the distribution of a goods item among the transport details.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG231SG23Optional
SGP2A segment to identify the equipment in which goods are transported.Mandatory
SG242SG24Mandatory
MEA3A segment to specify measurements of that portion of the goods item in the equipment.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG251SG25Optional
DGS2A segment to indicate the class of dangerous goods, packing group, etc.Mandatory
FTX2A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.Optional
SG262SG26Optional
CTA3A segment to identify a person or department.Mandatory
COM3A segment to identify a communication number of a person or department.Optional
SG272SG27Optional
MEA3A segment to specify measurements of the dangerous goods.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG282SG28Optional
SGP3A segment to identify the equipment in which the dangerous goods are transported.Mandatory
SG293SG29Mandatory
MEA4A segment to specify measurements of that portion of the dangerous goods in the equipment.Mandatory
EQN4A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG300SG30Optional
EQD1A segment to specify equipment, and equipment size and type used in the transport.Mandatory
EQN1A segment to specify number of pieces of equipment required.Optional
TMD1A segment to specify transport movement details for the equipment.Optional
MEA1A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.Optional
DIM1A segment to specify dimensions applicable to equipment.Optional
TPL1A segment to identify transport details for the equipment.Optional
HAN1A segment to specify handling instructions for specified equipment.Optional
TMP1A segment to specify a temperature setting for the equipment.Optional
FTX1A segment to specify processable supplementary information associated with the equipment.Optional
RFF1A segment to specify a reference number to equipment.Optional
SG311SG31Optional
NAD2A segment to specify a pick-up or drop-off address.Mandatory
DTM2A segment to indicate date and time relating to pick-up or drop-off.Optional
SG322SG32Optional
CTA3A segment to specify a contact name associated with a specified equipment positioning or collection address.Mandatory
COM3A segment to specify a communication number related to the contact.Optional
UNT0A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.Mandatory