© 2018 ProgM

Nachricht IFTMCA: D

NameIFTMCA
VersionD
Release18A
BeschreibungConsignment advice message

Elemente

SegmentEbeneBeschreibungOpt/Mand.
UNH0A service segment starting and uniquely identifying a message. The message type code for the Consignment advice message is IFTMCA. Note: Consignment advice messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTMCA D A UNMandatory
BGM0A segment to indicate the beginning of a message and to transmit identifying number and type of the message.Mandatory
CTA0A segment to identify a person or department to whom communication should be directed.Optional
COM0A segment to identify a communication number of a person or department to whom communication should be directed.Optional
DTM0A segment to indicate a date and time applying to the whole message, e.g. date and time of document issue.Optional
MOA0A segment to indicate a monetary value for entire consignment e.g. insured value, invoice amount etc.Optional
FTX0A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.Optional
CNT0A segment to specify totals for a consignment.Optional
DOC0A segment to indicate the number of document copies required (such as the number of ocean Bill of Lading copies needed by the customer).Optional
PCD0A segment to indicate a percentage for the entire consignment, e.g. the percentage of the total sum insured that is certified by the message.Optional
SG10SG1Optional
LOC1A segment to identify a location applying to the entire message.Mandatory
DTM1A segment to indicate date(s) and time(s) relating to the location.Optional
SG20SG2Optional
TOD1A segment to specify the applicable terms of delivery.Mandatory
LOC1A segment to specify a location related to the terms of delivery.Optional
SG30SG3Optional
RFF1A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this message (according to the Message Function data element in the Beginning of Message segment), booking reference, order number, insurance contract, etc.Mandatory
DTM1A segment to indicate date and time relating to the reference.Optional
SG40SG4Optional
GOR1A segment to indicate applicable governmental procedures related to import, export and transport of the goods.Mandatory
DTM1A segment to indicate date and time related to documents and/or Customs and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.).Optional
LOC1A segment to specify locations associated with Customs and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.).Optional
SEL1A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment.Optional
FTX1A segment to provide supplementary governmental requirements information.Optional
SG51SG5Optional
DOC2A segment to indicate a document required by government.Mandatory
DTM2A segment to specify the date/time related to the required document.Optional
SG60SG6Optional
TCC1A segment to specify a charge associated with the transport.Mandatory
MOA1A segment to specify a monetary amount, such as insurance premium.Optional
PCD1A segment to specify a percentage, such as insurance premium rate.Optional
SG70SG7Optional
ICD1A segment to specify an insurance cover.Mandatory
DTM1A segment to indicate the release date of the terms and conditions of insurance cover.Optional
FTX1A segment to specify special covers or to provide cover extensions or restrictions.Optional
SG80SG8Optional
TDT1A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.Mandatory
DTM1A segment to indicate date(s) and time(s) related to the transport stage.Optional
SG91SG9Optional
LOC2A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.Mandatory
DTM2A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.Optional
SG101SG10Optional
RFF2A segment to specify the additional reference.Mandatory
DTM2A segment to identify date and time relating to the reference.Optional
SG111SG11Optional
TCC2A segment to specify charge.Mandatory
MOA2A segment to specify a monetary amount, such as insurance premium.Optional
PCD2A segment to indicate a percentage, such as insurance premium rate.Optional
SG121SG12Optional
ICD2A segment to specify an insurance cover.Mandatory
DTM2A segment to indicate the release date of the terms and conditions of insurance cover.Optional
FTX2A segment to specify special covers or to provide cover extensions or restrictions.Optional
SG130SG13Optional
NAD1A segment to identify the party's name, address and function.Mandatory
LOC1A segment to indicate location where a specific function will be performed.Optional
PCD1A segment to specify a percentage related to the party, such as the underwriter's risk share.Optional
SG141SG14Optional
CTA2A segment to identify a person or department within a party.Mandatory
COM2A segment to identify a communication number of a person or department to whom communication should be directed.Optional
SG151SG15Optional
DOC2A segment to identify a document required of, by or for the party.Mandatory
DTM2A segment to identify date and time relating to the document.Optional
SG161SG16Optional
RFF2A segment to identify a reference used by a party.Mandatory
DTM2A segment to indicate date and time relating to the reference.Optional
SG170SG17Optional
GID1A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.Mandatory
HAN1A segment to specify handling instructions relating to the goods item.Optional
TMP1A segment to specify a temperature setting for a goods item.Optional
RNG1A segment to specify a temperature range setting for a goods item.Optional
TMD1A segment to specify transport movement details for a goods item.Optional
LOC1A segment to specify a country associated with a goods item, such as country of origin, or country of destination.Optional
MOA1A segment to specify a monetary amount associated with a goods item, such as insured value, FOB value, etc.Optional
PIA1A segment to specify article numbers.Optional
FTX1A segment to specify processable supplementary information relating to the goods item.Optional
SG181SG18Optional
NAD2A segment to specify an address of a place of collection or delivery for a goods item.Mandatory
DTM2A segment to indicate date and time relating to the place of collection or delivery.Optional
GDS1A segment to describe the nature of cargo.Optional
SG191SG19Optional
MEA2A segment to specify measurements, other than dimensions, applicable to a goods item.Mandatory
EQN2A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG201SG20Optional
DIM2To specify dimensions applicable to a goods item.Mandatory
EQN2A segment to specify the number of equipment units to each of which the given dimension applies.Optional
SG211SG21Optional
RFF2A segment to identify a reference to a goods item.Mandatory
DTM2A segment to indicate date and time relating to the reference.Optional
SG221SG22Optional
PCI2A segment to specify marks and numbers of a goods item.Mandatory
RFF2A segment to identify a reference relating to the marks and numbers.Optional
DTM2A segment to identify date and time of the reference.Optional
SG231SG23Optional
DOC2A segment to specify a document prepared for a goods item.Mandatory
DTM2A segment to associate date and time with the prepared document.Optional
SG241SG24Optional
GOR2A segment to indicate applicable governmental procedures related to import, export and transport of the goods item.Mandatory
DTM2A segment to indicate date and time relating to documents and/or Customs and/or governmental procedures for the goods item.Optional
LOC2A segment to specify locations associated with Customs and/or governmental procedures.Optional
SEL2A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the goods item.Optional
FTX2A segment to provide additional governmental requirements information for the goods item.Optional
SG252SG25Optional
DOC3A segment to identify a document required by government.Mandatory
DTM3A segment to specify the date/time related to the required document.Optional
SG261SG26Optional
TPL2A segment to identify transport details for a goods item.Mandatory
SG272SG27Mandatory
MEA3A segment to specify the distribution of a goods item among the transport details.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG281SG28Optional
SGP2A segment to identify the equipment in which goods are transported.Mandatory
SG292SG29Mandatory
MEA3A segment to specify measurements of that portion of goods item in the equipment.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG301SG30Optional
TCC2A segment to specify a charge.Mandatory
MOA2A segment to specify a monetary amount, such as insurance premium.Optional
PCD2A segment to indicate a percentage, such as insurance premium rate.Optional
SG311SG31Optional
ICD2A segment to specify insurance cover.Mandatory
DTM2A segment to indicate the release date of the terms and conditions of insurance cover.Optional
FTX2A segment to specify special covers or to provide cover extensions or restrictions.Optional
SG321SG32Optional
DGS2A segment to indicate the class of dangerous goods, packing group, etc.Mandatory
FTX2A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.Optional
SG332SG33Optional
CTA3A segment to identify a person or department.Mandatory
COM3A segment to identify a communication number of a person or department.Optional
SG342SG34Optional
MEA3A segment to specify measurements of the dangerous goods.Mandatory
EQN3A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG352SG35Optional
SGP3A segment to identify the equipment in which the dangerous goods are transported.Mandatory
SG363SG36Mandatory
MEA4A segment to specify measurements of that portion of the dangerous goods in the equipment.Mandatory
EQN4A segment to specify the number of equipment units to each of which the given measurement applies.Optional
SG370SG37Optional
EQD1A segment to specify equipment, and equipment size and type used in the transport.Mandatory
EQN1A segment to specify the number of pieces of equipment required.Optional
TMD1A segment to specify transport movement details for the equipment.Optional
MEA1A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.Optional
DIM1A segment to specify dimensions applicable to equipment.Optional
SEL1A segment to identify seal and seal issuer associated with the equipment.Optional
TPL1A segment to identify transport details for the equipment.Optional
HAN1A segment to specify handling instructions for specified equipment.Optional
TMP1A segment to indicate a temperature setting for the equipment.Optional
FTX1A segment to specify processable supplementary information associated with the equipment.Optional
SG381SG38Optional
NAD2A segment to specify a pick-up or drop-off address.Mandatory
DTM2A segment to indicate date and time relating to pick-up or drop-off.Optional
SG392SG39Optional
CTA3A segment to specify a contact name associated with a specified equipment positioning or collection address.Mandatory
COM3A segment to specify a communication number related to the contact.Optional
SG401SG40Optional
EQA2A segment to identify attached or related equipment such as a chassis attached to a container.Mandatory
EQN2A segment to specify number of pieces of equipment required.Optional
UNT0A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.Mandatory