© 2018 ProgM

Nachricht PRICAT: D

NamePRICAT
VersionD
Release18B
BeschreibungPrice/sales catalogue message

Elemente

SegmentEbeneBeschreibungOpt/Mand.
UNH0A service segment starting and uniquely identifying a message. The message type code for the Price/sales catalogue message is PRICAT. Note: Price/sales catalogue messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 PRICAT D B UNMandatory
BGM0A segment by which the sender must uniquely identify the Price/Sales catalogue by means of its type and number and when necessary its function.Mandatory
DTM0A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the Price/sales catalogue document date. Examples of the use of this DTM segment are: Lead times that apply to the whole Price/Sales catalogue or expiration date/time of the Price/sales catalogue. The Date/time/period segment within other Segment groups should be used whenever the date/time/period requires to be logically related to another specified data item. e.g. the Reference date is specified within the RFF segment group.Mandatory
ALI0A segment indicating special conditions related to the total Price/sales catalogue owing to origin, customs preference, or other commercial factors.Optional
FTX0A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.Optional
SG10SG1Optional
RFF1A segment identifying the reference by its number and where appropriate, a line number within a document.Mandatory
DTM1A segment specifying the date/time related to the reference.Optional
SG20SG2Optional
NAD1A segment identifying names and addresses of the parties, in coded or clear form, and their functions. Identification of the sender and receiver parties is mandatory for the Price/sales catalogue message. It is recommended that where possible only the coded form of the party ID should be specified, e.g. The sender and the receiver are known to each other, thus only the coded ID is required, but the other parties specified in the message may vary and would have to be clearly specified, preferably in structured format.Mandatory
LOC1A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.Optional
SG31SG3Optional
RFF2A segment identifying the reference by its number and where appropriate a line number within a document.Mandatory
DTM2A segment specifying the date and/or time related to the reference.Optional
SG41SG4Optional
CTA2A segment to identify a person or department, and their function, to whom communications should be directed.Mandatory
COM2A segment to identify a communications type and number for the contact specified in the CTA segment.Optional
SG50SG5Optional
TAX1A segment specifying a tax type, category and rate, or exemption.Mandatory
MOA1A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.Optional
DTM1A segment indicating the date of application of the specified tax.Optional
SG60SG6Optional
CUX1A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.Mandatory
DTM1A segment specifying the date/time/period related to the rate of exchange.Optional
SG70SG7Optional
PYT1A segment identifying the payment terms and date/time basis.Mandatory
DTM1A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.Optional
PCD1A segment specifying the discount, interest, penalty as well as instalment percentage.Optional
MOA1A segment specifying amounts related to payment discounts, penalties or instalments.Optional
SG80SG8Optional
TDT1A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.Mandatory
LOC1A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.Optional
SG90SG9Optional
TOD1A segment identifying the delivery terms to be used, e.g. UN INCOTERMS.Mandatory
LOC1A segment identifying locations relevant to the delivery terms specified in the TOD segment.Optional
SG100SG10Optional
ALC1A segment identifying the charge or allowance and, where necessary its calculation sequence.Mandatory
ALI1A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.Optional
DTM1A segment indicating any dates, times or periods applicable to the allowances and charges specified at heading level.Optional
SG111SG11Optional
QTY2A segment identifying the type of quantity and the quantity related to the allowance or charge.Mandatory
RNG2A segment specifying, if required, the range to which the allowance or charge applies.Optional
SG121SG12Optional
PCD2A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.Mandatory
RNG2A segment specifying, if required, a range for the application of the percentage.Optional
SG131SG13Optional
MOA2A segment identifying the monetary amount for the allowance or charge.Mandatory
RNG2A segment specifying, if required, a range for the application of the allowance/charge amount.Optional
SG141SG14Optional
RTE2A segment specifying the rate per unit and the basis for calculation.Mandatory
RNG2A segment specifying, if required, the range for the application of the allowance/charge rate.Optional
SG151SG15Optional
TAX2A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.Mandatory
MOA2A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).Optional
DTM2A segment indicating the date of application of the specified tax.Optional
SG160SG16Optional
TRU1A segment identifying technical rules and conditions relevant for the whole message.Mandatory
DTM1A segment specifying dates associated with the technical rules.Optional
SG170SG17Optional
PGI1A segment identifying the products Price/Tariff group where applicable.Mandatory
DTM1A segment indicating date/time/period related to the price group. e.g. expiration date/time or validity period for the price group. Lead time of the goods/services mentioned in the price group can also be provided by the DTM segment.Optional
QTY1A segment to specify pertinent quantities related to the specified price group, e.g. minimum order quantity.Optional
ALI1A segment indicating that the price group is subject to special conditions owing to origin, customs preference or commercial factors.Optional
FTX1A segment with free text information, in coded or clear form, used when additional information is needed for the specification of the price group. In computer to computer exchanges such text will normally require the receiver to process this segment manually.Optional
SG181SG18Optional
CUX2A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.Mandatory
DTM2A segment specifying the date/time/period related to the rate of exchange.Optional
SG191SG19Optional
PRI2A segment providing either the unit or reference price and the price type, valid for the pricing group.Mandatory
CUX2A segment identifying the currency in which the price is expressed.Optional
APR2A segment to identify additional pricing information related to the class or type of trade and additionally identifying the reason for any change.Optional
RNG2A segment to identify a quantity or an amount range to which the price information applies.Optional
DTM2A segment to identify the date/time/period information related to the price information, e.g. period of validity.Optional
SG201SG20Optional
TAX2A segment specifying a tax type, category and rate, or exemption.Mandatory
MOA2A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.Optional
DTM2A segment indicating the date of application of the specified tax.Optional
SG211SG21Optional
ALC2A segment identifying the charge or allowance and, where necessary its calculation sequence.Mandatory
ALI2A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors..Optional
SG222SG22Optional
QTY3A segment identifying the type of quantity and the quantity related to the allowance or charge.Mandatory
RNG3A segment specifying, if required, the range to which the allowance or charge applies.Optional
SG232SG23Optional
PCD3A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.Mandatory
RNG3A segment specifying, if required, a range for the application of the percentage.Optional
SG242SG24Optional
MOA3A segment identifying the monetary amount for the allowance or charge.Mandatory
RNG3A segment specifying, if required, a range for the application of the allowance/charge amount.Optional
SG252SG25Optional
RTE3A segment specifying the rate per unit and the basis for calculation.Mandatory
RNG3A segment specifying, if required, the range for the application of the allowance/charge rate.Optional
SG262SG26Optional
TAX3A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.Mandatory
MOA3A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).Optional
DTM3A segment indicating the date of application of the specified tax.Optional
SG271SG27Optional
NAD2A segment identifying names and addresses of the parties, in coded or clear form, and their functions. It is recommended that where possible only the coded form of the party ID should be specified. e.g. The sender and the receiver are known to each other, thus only the coded ID is required, but the other parties specified in the message may vary and would have to be clearly specified, preferably in structured format.Mandatory
LOC2A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.Optional
SG282SG28Optional
RFF3A segment identifying the reference by its number and where appropriate a line number within a document.Mandatory
DTM3A segment specifying the date and/or time related to the reference.Optional
SG292SG29Optional
CTA3A segment to identify a person or department, and their function, to whom communications should be directed.Mandatory
COM3A segment to identify a communications type and number for the contact specified in the CTA segment.Optional
SG301SG30Optional
PYT2A segment identifying the payment terms and date/time basis.Mandatory
DTM2A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.Optional
PCD2A segment specifying the discount, interest, penalty as well as instalment percentage.Optional
MOA2A segment specifying amounts related to payment discounts, penalties or instalments.Optional
SG311SG31Optional
TDT2A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.Mandatory
LOC2A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.Optional
SG321SG32Optional
TOD2A segment identifying the delivery terms to be used. e.g. UN INCOTERMS.Mandatory
LOC2A segment identifying locations relevant to the delivery terms specified in the TOD segment.Optional
SG331SG33Optional
PAC2A segment specifying the physical type of packages for the price group. e.g. pallets.Mandatory
MEA2A segment specifying physical measurements of packages described in the PAC segment e.g. pallet size.Optional
HAN2A segment providing information on required handling instructions of materials and additionally, if required, notifying hazardous materials in the whole pricing group.Optional
SG341SG34Optional
EFI2This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange.Mandatory
CED2To give precise definitions of all necessary elements belonging to the configuration of a computer system e.g. hardware, firmware, operating system, communication and application software.Optional
COM2To identify a communication number of a department or a person to whom communication should be directed.Optional
RFF2A segment giving a reference related to the file identified by a previous external file link identification segment.Optional
DTM2This segment will convey the date/time details of the external file.Optional
QTY2The size/volume of the external file identified in the previous external file link identification segment.Optional
SG351SG35Optional
TRU2A segment identifying technical rules and conditions applying to a product group.Mandatory
DTM2A segment specifying dates associated with the technical rules and issue dates applying to a product group.Optional
SG361SG36Optional
LIN2A segment identifying the line item (or sub-line item in a configuration).Mandatory
PIA2A segment for identifying a product in the Price Catalogue.Optional
IMD2A segment for describing the product or service as well as its characteristics. This segment should be used for products or services that cannot be identified by a product code or article number.Optional
MEA2A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.Optional
QTY2A segment to specify pertinent quantities related to the specified price item line, e.g. minimum order quantity.Optional
HAN2A segment providing information on required handling of materials in the line item, and additionally, if required, notifying hazardous materials.Optional
ALI2A segment specifying the relevant additional information for an item, e.g. country of origin.Optional
DTM2A segment specifying the date, and when relevant, the time or period of an activity identified by the date/time/period qualifier. e.g. expiration date of the price/sales catalogue for the price item line.Optional
RFF2A segment identifying a reference, which is related to the described article, by its number.Optional
LOC2A segment to indicate country of origin and country of the despatch.Optional
DOC2A segment to indicate that a movement certificate is required.Optional
PTY2A segment to provide a priority which is associated with the item being described.Optional
FTX2A segment with free text information, in coded or clear form, used when additional information is needed at the line item levelled within other segment. In computer to computer exchanges such text will normally require the receiver to process this segment manually.Optional
SG372SG37Optional
CCI3A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.Mandatory
CAV3A segment to specify common product characteristic by value in either coded form or in free format.Optional
MEA3A segment indicating characteristic value being physical measurement (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges.Optional
SG382SG38Optional
TAX3A segment specifying a tax type, category and rate, or exemption.Mandatory
MOA3A segment specifying the amount for the identified tax/fee, e.g. a stamp fee.Optional
DTM3A segment indicating the date of application of the specified tax.Optional
SG392SG39Optional
CUX3A segment identifying the currencies required in the Price/sales catalogue, e.g. the Price/sales catalogue currency. A rate of exchange may be given to convert a reference currency into a target currency.Mandatory
DTM3A segment specifying the date/time/period related to the rate of exchange.Optional
SG402SG40Optional
PRI3A segment providing either the unit or reference price and the price type, valid for the pricing group.Mandatory
CUX3A segment identifying the currency in which the price is expressed.Optional
APR3A segment to identify additional pricing information related to the class or type of trade and additionally identifying the reason for any change.Optional
RNG3A segment to identify a quantity or an amount range to which the price information applies.Optional
DTM3A segment to identify the date/time/period information related to the price information, e.g. period of validity.Optional
PCD3A segment to indicate percentage increase of decrease in price since last information.Optional
LOC3This segment is used to provide locations related to the price such as market region.Optional
SG412SG41Optional
ALC3A segment identifying the charge or allowance and, where necessary its calculation sequence.Mandatory
ALI3A segment indicating that the allowance or charge specified is subject to special conditions owing to origin, customs preference or commercial factors.Optional
DTM3A segment indicating any dates, times or periods applicable to the allowances and charges specified at detail level.Optional
LOC3This segment is used to provide locations related to the allowance or charge, such as market region.Optional
SG423SG42Optional
QTY4A segment identifying the type of quantity and the quantity related to the allowance or charge.Mandatory
RNG4A segment specifying, if required, the range to which the allowance or charge applies.Optional
SG433SG43Optional
PCD4A segment identifying the percentage and the percentage basis for the calculation of the allowance or charge.Mandatory
RNG4A segment specifying, if required, a range for the application of the percentage.Optional
SG443SG44Optional
MOA4A segment identifying the monetary amount for the allowance or charge.Mandatory
RNG4A segment specifying, if required, a range for the application of the allowance/charge amount.Optional
SG453SG45Optional
RTE4A segment specifying the rate per unit and the basis for calculation.Mandatory
RNG4A segment specifying, if required, the range for the application of the allowance/charge rate.Optional
SG463SG46Optional
TAX4A segment specifying the tax type, category, and rate, or exemption, related to the allowance or charge.Mandatory
MOA4A segment specifying a monetary amount for the allowance or charge. (e.g. a stamp fee).Optional
DTM4A segment indicating the date of application of the specified tax.Optional
SG472SG47Optional
PAC3A segment specifying the physical type of packages for the Price item line.Mandatory
MEA3A segment specifying physical measurements of packages described in the PAC segment e.g. box size.Optional
QTY3A segment specifying the maximum quantity number of packages which can be stacked safely on another package and/or the number of items normally contained within the package.Optional
HAN3A segment providing information on required handling of materials in the price item line, and additionally, if required, notifying hazardous materials.Optional
SG482SG48Optional
PYT3A segment identifying the payment terms and date/time basis.Mandatory
DTM3A segment giving the specific date/time/period, if needed, of any payments, discounts, instalments etc.Optional
PCD3A segment specifying the discount, interest, penalty as well as instalment percentage.Optional
MOA3A segment specifying amounts related to payment discounts, penalties or instalments.Optional
SG492SG49Optional
TDT3A segment specifying the mode, means and identification of the transport for the goods listed in the Price/sales catalogue. If required, the carrier's address should be indicated within the NAD segment group.Mandatory
LOC3A segment identifying locations relevant to the transport specified in the TDT segment, e.g. place of departure or border crossing point.Optional
SG502SG50Optional
TOD3A segment identifying the delivery terms to be used. e.g. UN INCOTERMS.Mandatory
LOC3A segment identifying locations relevant to the delivery terms specified in the TOD segment.Optional
SG512SG51Optional
EFI3This segment will identify the external files by indicating the file name, file number and its sequence number in an exchange.Mandatory
CED3To give precise definitions of all necessary elements belonging to the configuration of a computer system, e.g. hardware, firmware, operating system, communication and application software.Optional
COM3To identify a communication number of a department or a person to whom communication should be directed.Optional
RFF3A segment giving a reference related to the file identified by a previous external file link identification segment.Optional
DTM3This segment will convey the date/time details of the external file.Optional
QTY3The size/volume of the external file identified in the previous external file link identification segment.Optional
SG522SG52Optional
NAD3A segment identifying names and addresses of the parties, in coded or clear form, and their functions. It is recommended that where possible only the coded form of the party identification should be specified.Mandatory
SG533SG53Mandatory
CTA4A segment to identify a person or a department and to whom the communication should be directed.Mandatory
COM4A segment to identify a communication type and number for the current contact.Optional
SG542SG54Optional
TRU3A segment identifying technical rules and conditions relevant for the current product.Mandatory
DTM3A segment specifying dates associated with the technical rules.Optional
SG552SG55Optional
DGS3A segment providing dangerous goods information for the current product by using relevant dangerous goods identification.Mandatory
QTY3A segment to specify quantity for the given dangerous goods.Optional
FTX3A segment with free text information, in clear form, related to dangerous goods. In computer to computer exchanges such text will normally require the receiver to process this segment manually.Optional
SG562SG56Optional
HYN3A segment to identify hierarchical connections from the given product to higher or lower levelled products and its function.Mandatory
PIA3A segment providing either additional identification of the product specified in the hierarchy segment or any substitute product identification.Optional
QTY3A segment identifying the child product's quantity contained within the identified parent product.Optional
FTX3A segment with free text information, in coded or clear form, used when additional information on the actual product and its hierarchical connections is required.Optional
SG573SG57Optional
RFF4A segment identifying the reference linked to the hierarchical item, for example the drawing number on a wiring diagram.Mandatory
DTM4A segment specifying the date and, or time related to the reference.Optional
SG583SG58Optional
CCI4A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.Mandatory
CAV4A segment to specify product characteristic by value in either coded form or in free format.Optional
MEA4A segment indicating characteristic values being physical measurements (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges. The MEA-segment is repeatable to allow the indication of a number of applicable measurable values, for example one electric appliance may be switchable for different voltages: 110V, 220V, 240V and 380V.Optional
SG593SG59Optional
NAD4A segment identifying a party preferably in coded form to which specific product and hierarchical item characteristics apply.Mandatory
PIA4A segment providing additional identification(s) of the hierarchically linked product that are specific to the identified party, for example an additional number from another origin to identify the higher or lower levelled product relevant to the identified party.Optional
QTY4A segment identifying the child product's quantity contained within the identified parent product if specially defined by the named party.Optional
SG604SG60Optional
CCI5A segment to identify product characteristic and, or the characteristic name and characteristic relevance for the business process.Mandatory
CAV5A segment to specify product-characteristic by value in either coded form or in free format.Optional
MEA5A segment indicating characteristic values being physical measurements (including measurable quantities and percentages) related to specified product characteristics (for example voltage, percentage of material contained) and where relevant measurement ranges. The MEA-segment is repeatable to allow the indication of a number of applicable measurable values, for example one electric appliance may be switchable for different voltages: V, 220V, 240V and 380V.Optional
UNT0A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.Mandatory