© 2018 ProgM

Nachricht QALITY: D

NameQALITY
VersionD
Release18B
BeschreibungQuality data message

Elemente

SegmentEbeneBeschreibungOpt/Mand.
UNH0A service segment starting and uniquely identifying a message. The message type code for the Quality data message is QALITY. Note: Quality data messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 QALITY D B UNMandatory
BGM0A segment by which the sender uniquely identifies the Quality Data Message by means of its type and number.Mandatory
DTM0A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the quality data message date. Example of the use of this DTM-segment is : date/time frame of reported data that apply to the whole quality data message. The Date/time/period segment within other segment groups should be used whenever the date/time/period requires to be logically related to another specified data item; e.g. date of measurement must be specified within the measurement segment group.Mandatory
IMD0A segment for describing the product involved.Optional
MEA0A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.Optional
FTX0A segment with free text information, in coded or clear form, to give further clarification, when required, to the whole message. In computer to computer exchanges such text will normally require the receiver to handle this segment manually.Optional
SG10SG1Optional
RFF1A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM1A segment specifying the date/time of the referenced document.Optional
SG20SG2Optional
NAD1A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the whole Quality Data Message. Identification of the Sender and Receiver party is mandatory for the Quality Data Message. They are to be given in the NAD segment.Mandatory
LOC1A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.Optional
SG31SG3Optional
RFF2A segment identifying the reference by its number and where appropriate a line number within a document.Mandatory
DTM2A segment specifying the date/time of the reference.Optional
SG41SG4Optional
CTA2A segment to identify a person or department, and their function, to whom communications should be directed.Mandatory
COM2A segment to identify a communication type and number for the contact specified in the CTA segment.Optional
SG50SG5Optional
LIN1A segment identifying the line item by its number and additionally, identifying the product involved by a product identification number. Other product identification numbers are specified in the following PIA segment, e.g. Customer part number, etc.Mandatory
PIA1A segment providing additional product identification to that specified in the LIN segment, e.g. Buyer part number.Optional
IMD1A segment for describing the product involved. This segment should be used for products that cannot be identified by a product code or article number.Optional
MEA1A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.Optional
PSD1A segment to define the physical sample parameters, associated with a test, resulting in discrete measurements. If used in this position, the values apply to all following values of product properties.Optional
SPS1A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values apply to all following values of product properties.Optional
DTM1A segment specifying date/time/period details to the line item only.Optional
QTY1A segment to enable quantity information to be specified.Optional
FTX1A segment with free text in coded or clear form, to give further clarification, when required, for the line item. In computer to computer exchanges such text will normally require the receiver to handle this segment manually.Optional
SG61SG6Optional
RFF2A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM2A segment specifying the date/time of the referenced document.Optional
SG71SG7Optional
NAD2A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the line item.Mandatory
LOC2A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.Optional
SG82SG8Optional
RFF3A segment identifying the reference by its number and where appropriate a line number within a document.Mandatory
DTM3A segment specifying the date and/or time of the reference.Optional
SG92SG9Optional
CTA3A segment to identify a person or department, and their function, to whom communications should be directed.Mandatory
COM3A segment to identify a communication type and number for the contact specified in the CTA segment.Optional
SG101SG10Optional
TEM2A segment to describe the nature of the test performed.Mandatory
MEA2A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.Optional
DTM2A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.Optional
SG112SG11Optional
RFF3A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM3A segment specifying the date/time of the referenced document.Optional
SG121SG12Optional
CCI2To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.Mandatory
PSD2A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.Optional
SPS2A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.Optional
DTM2A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.Optional
FTX2A segment with free text information to give further clarification within Segment group 12: the Analysis Group.Optional
SG132SG13Optional
RFF3A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM3A segment specifying the date/time of the referenced document.Optional
SG142SG14Optional
MEA3A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.Mandatory
DTM3A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.Optional
SG153SG15Optional
RFF4A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM4A segment specifying the date/time of the referenced document.Optional
SG162SG16Optional
STA3A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.Mandatory
DTM3A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.Optional
SG173SG17Optional
RFF4A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM4A segment specifying the date/time of the referenced document.Optional
SG182SG18Optional
TEM3A segment to describe the nature of the test performed.Mandatory
MEA3A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.Optional
DTM3A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.Optional
SG193SG19Optional
RFF4A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM4A segment specifying the date/time of the referenced document.Optional
SG201SG20Optional
GIN2A segment providing specific serial or batch numbers, relating to the specified product. These may be single numbers or ranges of numbers.Mandatory
DTM2A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. batch process date.Optional
SG212SG21Optional
RFF3A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM3A segment specifying the date/time of the referenced document.Optional
SG222SG22Optional
CCI3To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The Characteristic description (data element 7036) should only be used to enhance the meaning of the code value. If no specific code available, use code value ZZ (mutually defined) in DE 7037 and use DE 7036 to describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.Mandatory
PSD3A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.Optional
SPS3A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.Optional
DTM3A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.Optional
FTX3A segment with free text information to give further clarification.Optional
SG233SG23Optional
RFF4A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM4A segment specifying the date/time of the referenced document.Optional
SG243SG24Optional
MEA4A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.Mandatory
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.Optional
SG254SG25Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
SG263SG26Optional
STA4A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.Mandatory
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.Optional
SG274SG27Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
SG283SG28Optional
TEM4A segment to describe the nature of the test performed.Mandatory
MEA4A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.Optional
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.Optional
SG294SG29Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
SG301SG30Optional
PRC2A segment to specify the process/sub-process type and description to which the data is related.Mandatory
SG312SG31Mandatory
NAD3A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the process.Mandatory
LOC3A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.Optional
SG322SG32Optional
CCI3To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.Mandatory
PSD3A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.Optional
SPS3A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.Optional
DTM3A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.Optional
FTX3A segment with free text information to give further clarification within Segment group 32: the Analysis Group.Optional
SG333SG33Optional
RFF4A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM4A segment specifying the date/time of the referenced document.Optional
SG343SG34Optional
MEA4A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.Mandatory
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.Optional
SG354SG35Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
SG363SG36Optional
STA4A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.Mandatory
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.Optional
SG374SG37Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
SG383SG38Optional
TEM4A segment to describe the nature of the test performed.Mandatory
MEA4A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.Optional
DTM4A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.Optional
SG394SG39Optional
RFF5A segment identifying the referenced document by its number and where appropriate, a line number within that document.Mandatory
DTM5A segment specifying the date/time of the referenced document.Optional
UNT0A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.Mandatory